Important Electrical Information; Important Operation Instructions - Techness RUN 200 Manual De Usuario

1.1 IMPORTANT ELECTRICAL INFORMATION

WARNING!
1. NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the
power cord away from any moving part of the treadmill including the elevation mechanism and
transport wheels.
2. NEVER remove any cover without disconnecting the AC power first.

1.2 IMPORTANT OPERATION INSTRUCTIONS

Understand that changes in speed and incline do not occur immediately. Set your desired speed
on the computer console and release the adjustment key. The computer will obey the command
gradually.
Use caution while doing other activities while walking on your treadmill; such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking
in the centre of the belt; which may result in serious injury.
NEVER mount or dismount the treadmill while the belt is moving. This unit starts with a very
low speed. Simply standing on the belt during slow acceleration is proper after you have learnt
to operate this machine.
Always hold on to handrail while making control changes.
A safety key is provided with this machine. Remove the safety key will stop the walking belt;
the treadmill will shut off automatically. Insert the safety key will reset the display.
Do not use excessive pressure on console control keys. They are precision set to function
properly with light finger pressure.
5