TaoTronics SoundLiberty Pro S10 Manual De Instrucciones página 5

Power ON / OFF
ON
Uncover the lid
to power on.
USING YOUR EARBUDS
Bluetooth Caution
• Place the two devices to be connected close to each other and turn off
other Bluetooth devices.
• The maximum effective Bluetooth range may vary with the environmental
circumstances. Obstacles (walls, fences, etc.) between the two devices
may shorten the effective range.
03 SoundLiberty Pro S10
OFF
Place back and close the
case to power off.
Bluetooth Pairing - Binaural Mode
1. Uncover the lid to bring into pairing mode automatically.
2. Turn on the Bluetooth function on your device and search for nearby devices.
3. Find "TaoTronics S10" in the search results, tap to connect.
ON
• Each time you power on your earbuds, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
• When the earbuds are disconnected from your device for more than
10 minutes, they will turn off automatically.
Bluetooth Pairing - Mono Mode
• When Bluetooth connected, you can use either one of the earbuds as per
your preference.
• Take out one earbud, and make sure the other one is placed in the case with the
lid covered.
• If you want to change to binaural mode, simply take out the other
earbud from the charging case, they will pair with each other automatically.
• Under Mono mode, swiping up or down is changing the volume, no matter
which earbud is in use.
TaoTronics S10
SoundLiberty Pro S10 04