How To Install Your Canopy Housing - Fanimation The Avaston FP6210 Serie Manual Del Propietário

5. After connections have been made, turn leads
upward and carefully push leads into the outlet box,
with the white and green leads to one side of the
box and the black leads to wards the other side.
NOTE: This step is applicable after the neccessary wiring is completed.
1. Remove one of the two shoulder screws in the
hanger bracket. Loosen the second shoulder screw
without fully removing it. Assemble canopy by
rotating key slot in canopy over shoulder screw in
hanger bracket. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that
was previously removed. (Figure 18)
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
2. Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket utilizing
the keyslot twist-lock feature. (Figrue 19)
How to Wire Your Ceiling Fan

How to Install Your Canopy Housing

WARNING
(continued)
LISTED OUTLET BOX
BLACK-ANT
10
WHITE
BLACK
BLUE
GREEN - Ground Wire
From Hanger Ball
GREEN - Ground Wire From
Hanger Bracket
Figure 17
Ceiling Canopy
Figure 18
Canopy Screw
Cover
Figure 19