Wayne Dalton 8000 Instrucciones De Instalación Y Manual Del Usuario página 12

2
Attaching Fully Adjustable
Flagangle to Vertical Track
Tools Needed:
NOTE: If you have quick install
fl agangle, skip this step and complete
None None
Step 3.
Hand tighten the fl agangle to the
vertical track using (2) 1/4"- 20 x 9/16"
large head ribbed track bolts and
(2) 1/4"- 20 fl ange hex nuts. Secure the
fl ange nuts after fl agangle spacing is
complete (Step 15).
NOTE: After completing this step,
continue with Step 4.
3
Attaching Quick Install Flag
Angle to Vertical Track
Tools Needed:
NOTE: If quick install fl agangle were
installed in step 2, skip this step and
None
continue with Step 4. If not, complete
this step.
Place the lower quick install tab of the
fl agangle in the quick install feature of
the vertical track. Give the fl agangle 1/4
turn to lock in place. Repeat for other
side.
12
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
FULLY ADJUSTABLE FLAGANGLE
1/4"- 20
FLANGE HEX
NUTS
VERTICAL TRACK
QUICK INSTALL TAB UNLOCKED
FLAGANGLE
VERTICAL
TRACK
LEFT HAND TRACK AND FLAGANGLE
1/4"- 20 X 9/16"
LARGE HEAD RIBBED
TRACK BOLTS
QUICK INSTALL TAB LOCKED
FLAGANGLE
VERTICAL
TRACK
RIGHT HAND TRACK AND FLAGANGLE