Craftmade ELLINGTON UBR48BNK4 Manual De Instrucciones página 28

5. Fan Assembly. (cont.)
With the hanging bracket secured to the
outlet box and able to support the fan, you
are now ready to hang your fan. Grab the fan
safety cable loop
wood
firmly with two hands. Slide downrod
ceiling
through opening in hanging bracket and let
joist
hanging ball rest on the hanging bracket.
wood screw
Turn the hanging ball slot until it lines up
and washer
with the hanging bracket tab.
safety cable
WARNING: Failure to align slot in hanging
ball with tab in hanging bracket may result
in serious injury or death.
hanging bracket tab
Tip: Seek the help of another person to hold
canopy
hanging ball slot
the stepladder in place and to help lift the
fan up to you once you are set on the ladder.
motor housing
Find a secure attachment point (wood
ceiling joist highly recommended) and
secure safety cable. It will be necessary to
use a heavy duty wood screw, washer and
lock washer (not supplied) with the safety
cable loop. If necessary, adjust the loop at
the end of the safety cable. The loop at the
end of the safety cable should just fit over
the threads on the wood screw. Extra cable
slack can be left in ceiling area.
page 5