EN
other end into the USB adapter
into a wall socket. The toothbrush will now be inductively charged.
You can also charge via any CE certified device with a USB port. In
this case, insert the micro USB cable into the micro USB port of
the case and the other end into the USB port of the device.
2. The charge level indicators
illuminated in red during the charging process.
3. The toothbrush is fully charged after approx. 16 hours and the
charge level indicators go out. Once fully charged, the rechargeable
battery will keep for up to 3 weeks.
Using the toothbrush
• Do not apply too much pressure to the toothbrush and your
teeth when brushing them.
• Your gums may bleed the fi rst few times you use the toothbrush.
If your gums bleed for more than 14 days, please consult a dentist.
• Brush your teeth using small circular movements.
• Clean up to the spaces between your teeth.
Brushing your teeth
1. Attach a brush head
tachment point
2. Select the desired mode by pushing the multifunction button within
3 seconds (see chapter "Selecting the mode"). Wait for more than
3 seconds to switch the toothbrush off.
3. Brush the upper and lower parts of your teeth as well as the exterior and
interior of your teeth for 30 seconds each without applying pressure.
4. After each use, clean the toothbrush as described in the chapter
"Cleaning".
4
6 11
1
to the hand piece
2
of the hand piece extends into the brush head.
After every 30 second interval, the toothbrush will stop for
0.5 seconds and automatically switch off after 2 minutes.
9
. Then, insert the USB adapter
on the toothbrush and case are
3
so that the brush at-