Instructions For Use Of The Dowel Centers; Marking Your Work Piece; Customer Support; Warranty Information - General E-Z Pro 851 Manual De Usuario

INSTRUCTIONS FOR USE OF THE DOWEL CENTERS

Two each x 1/4", 5/16" & 3/8" Dowel Centers are enclosed for use in conjunction with
the E•Z Pro Deluxe Doweling Jig Kit. These dowel centers help to make it easy to
precisely align two pieces of stock when marking the piece isn't practical.

MARKING YOUR WORK PIECE

Drill edge holes as previously instructed and insert a pair of appropriately sized Dowel
Center Points into those holes with the sharp points facing out. Align this piece to the
surface to be drilled and tap lightly on the far end of the board to embed the points of
the dowel centers into the opposite work piece. Drill you holes in the work piece at
these marks.

CUSTOMER SUPPORT

Please visit our website at www.generaltools.com to obtain additional woodworking
information, instructional videos and product manual.

WARRANTY INFORMATION

The E•Z Pro Deluxe Doweling Jig Kit from General Tools & Instruments is warranted
to the original purchaser to be free from defects in material and workmanship for a
period of one year. Subject to certain restrictions, General will repair or replace this
product, if, after examination, it is determined by General to be defective in material or
workmanship.

RETURN FOR REPAIR POLICY

Every effort has been made to provide you with a reliable product of superior quality.
However, in the event your instrument requires repair, please contact our Customer
Service to obtain an RGA (Return Goods Authorization) number before forwarding the
unit via prepaid freight to the attention of our Service Center at this address:
Remember to include a copy of your proof of purchase, your return address, and your
phone number and/or e-mail address.
If, at any time, you need additional help, feel free to call a
General Tools & Instruments
80 White Street
New York, NY 10013
212-431-6100
woodworking expert at General!
1