Bosch DHD Serie Manual De Uso Y Cuidado página 7

CARE AND CLEANING
Always use the mildest cleaner that will do the job. Use clean, soft cloths, sponges or
paper towels.
Rub stainless steel finishes in the direction of the grain. Wipe area dry to avoid water
marks.
After cleaning, place all parts in their proper positions before using.
The cleaners recommended below indicate a type and do not constitute an endorsement.
Use all products according to package directions.
Care and Cleaning Chart
A Anodized
Aluminum
Top Caps for sponge or paper towel and wipe clean.
Stainless
B Aluminum
Mesh Filters
C Plastic
Controls
D Painted
Top Cap for
Black/White
E Stainless
Steel Parts
Top cap is not removable. Wash top and underside with hot sudsy water.
Rinse and wipe dry or apply Fantastic
DO NOT USE powdered cleansers or steel wool pads.
Clean filters in the dishwasher or by agitating in sudsy water. Ensure that
there is no soil trapped in the fine mesh. Dry the filters before reinstalling
them.
DO NOT REMOVE push-button or control knob. Wipe with a moist
soapy sponge. Rinse and dry.
Wash top and underside with hot sudsy water. Rinse and wipe dry or
apply Fantastic ® or Formula 409
and wipe clean.
DO NOT USE powdered cleansers or steel wool pads.
Wipe grease accumulation with a paper towel or sponge. Scrape heavy
buildup with a plastic spatula. Clean with a soapy sponge; rinse and dry.
Always wipe or rub with grain. Wipe with Fantastic
sprayed onto a paper towel. If grease buildup is heavy, several
appliacations may be necessary.
Polish with Stainless Steel Magic
with a cloth dampened with white vinegar. Use Cameo Aluminum and
Stainless Steel Cleaner
® or Formula 409
® first to a clean sponge or paper towel
® and a soft cloth. Remove water spots
® to remove heat discoloration.
® first to a clean
® or Formula 409 ®
7