Audio Input; Dmx Output - LightProcessor Q 12 Manual De Instrucciones

•CONNECTIONS•
POWER IN
The Q12 requires a power supply of +18V. DC at 300mA.
put sockets on the Q12.

AUDIO INPUT

DMX OUTPUT

Old Version
This may be delivered by:-
•A Q Range power supply unit, either
through the Euro socket on the top
edge of the Q12 (where fitted - cen-
tre pin positive) or through the 5-pin
DIN PSU input socket on the back.
•A phantom supply from TWO
QPacks into the 8-pin analogue out-
Current Version
Depending on the version DMX output
connection are made either via a 5-pin
240° DIN plug wired as shown or via a 5-
pin XLR wired screen to pin 1, data nega-
tive to pin 2, data positive to pin 3. Pins 4
and 5 are not used.
Q
12
12