Mark SIDIUS LED 368 Z Instrucciones De Usuario página 5

Master/slave-operation
The master/slave-operation enables that several devices can be synchronized and controlled by one
master-device
DMX controlled operation
You can control the projectors individually via your DMX-controller
Addressing
The control board allows you to assign the DMX starting address,
Note;it's necessary to insert the XLR termination plug (with 120ohm) in the last device in the link in order
to ensure proper transmission on the DMX data link.
C ONT R O L B O AR D
The control board offer several features :you can simple set the starting address, run the
pre-programmed program or make a reset
The main menu is accessed by pressing the Mode/Esc button, Browse through the submenu by pressing
Up or Down .Press the Enter-button in order to select the desired menu. You can change the selection
by pressing Up or Down, Confirm every selection by pressing the Enter-button. You can leave every
mode by pressing the Mode/Esc-button .The functions provided are described in the following setting.
M EN U M AP
Ad d re s s
R un M ode
Te st M ode
SIDIUS LED 368 Z
001-512
DMX
Auto
Sound
Return
Pan
Tilt
Focus
Red
Green
Blue
White
Return
User Manual/Manual de uso
12/16CH
1-8
0-255
0-255
0-255
0-255
0-255
0-255
0-255
Page 4
EN