Removing Blockages; Important - Klarstein 10033287 Manual Del Usuario

Removing blockages

IMPORTANT: If the air inlet, hose or telescopic tube is blocked, switch off the vacuum
cleaner and remove the blockage (s) before re-starting the vacuum cleaner.
Removing debris from the brush bar
NOTE: Brush bar and belt are not removable.
If the light continues to flash red after resetting, the brush bar may still be blocked. Using
a pair of scissors, cut through any threads or hairs caught around the brush bar. To
access brush bar: Place the vacuum cleaner on the floor upside down.
Zugang zur Bürstenleiste
Place the vacuum cleaner
on the floor upside down.
Remove the screw on the
back of the brush bar
cover.
Remove the brush bar
cover and remove and
debris, hair and dirt from
the brush bar and belt.
EN
29