EdilKamin MYA Instalación Uso Y Mantenimiento página 40

POSSIBLE TROUBLESHOOTING
Remember that this component is subject to regular wear and so it is not covered by the guarantee.
gear motor..
11)
gear motor.
nic board
Move closer to the stove
radio channel search phase will start up automatically, and it will subsequently connect to the product de-
tected. So that this occurs correctly, make sure to switch the product on before inserting the batteries in the
radio control, and stay in the vicinity of the antenna in order to achieve radio coverage with certainty.
for a product manually, simply carry out the following operations after having already put the batteries into
the radio control:
- After 10" a "NETWORK SEARCH" message appears on the display, then release the o/I key, as this means
that the automatic search has been activated.
- Automatic tuning of the radio channel will occur within a few seconds.
NOTA 1
NOTA 2
NOTA 3
- Disconnect the power supply
2
DO NOT ATTEMPT TO PUT THE FIRE OUT WITH WATER!
Activated when anomalous, excessive current absorption is detected on the
IMPORTANT!!!
- 40
-
-
.