Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Measure the width of the inner side curtain with the provided ruler, as shown (FIG. 10). Mark a line on the
provided insulation panel according to the measured width, then cut out the insulation panel along the line,
as shown (FIG.11). Peel off the protecting film behind the insulation panel and stick the panel on the side
curtain, as shown (FIG.12). Repeat these instructions for the other side.
NOTE: It is difficult to lock the windows with the sash lock for Vinyl-Clad windows, so you can use lock by
window itself.
9
Cut foam window seal and insert it into the space between the upper and lower sashes (FIG. 14).
FIG. 13
4
L
L
FIG. 11
FIG. 10
L
FIG. 12
(FIG. 13).
FIG. 14
FOAM SEAL
Publicidad
