NUK DECT ECO Control + Manual Del Usario página 51

Low battery LED
on the parent unit
flashes
The parent unit
beeps
No sound or baby
noises coming
from the parent
unit
The parent unit
is too sensitive to
sounds
The baby monitor
produces a high-
pitched noise
The alkaline bat-
teries in the baby
unit are running
low quickly
UK Babyphone 10.256.267 (BM-200).indb 45
• The rechargeable batteries in the parent unit are
running low. To recharge the unit, connect the parent
unit to the mains power supply with the power adapter
supplied.
• The connection with the baby unit has been lost.
Reduce the distance between the parent unit and the
baby unit.
• The baby unit may be switched off. Press the POWER
key to switch on the baby unit.
• The rechargeable batteries in the parent unit are
running low. To recharge the unit, connect the parent
unit to the mains power supply with the power adapter
supplied.
• The volume level of the parent unit may be set too low
or to OFF. Increase the volume level of the parent unit
(see section 5.4).
• The microphone sensitivity level of the baby unit may
be set too low. Increase the sensitivity level of the baby
unit. (see section 5.10)
• The parent unit and the baby unit may be out of range
of one another. Reduce the distance between the units.
• Please also note that the units will always need approx.
30 seconds to connect to one another. (see section 6.1)
• The microphone sensitivity level of the baby unit may
be set too high. Decrease the microphone sensitivity
level of the baby unit using the parent unit. (see sec-
tion 5.10)
• The parent unit and the baby unit are too close to each
other. Make sure the parent unit and baby unit are at
least 1.5 metres away from each other.
• The speaker volume of the parent unit may be set too
high. Decrease the volume of the parent unit.
• The microphone sensitivity level of the baby unit may
be set too high, which will cause the baby unit to trans-
mit more frequently. Decrease the microphone sensitiv-
ity level of the baby unit using the parent unit.
• The volume level of the baby unit may be set too high,
which will consume power. Decrease the volume level
of the baby unit.
45
17.12.2009 14:10:0