Mounting The Light Fixture - Defiant DFI-5852-BK Guía De Uso Y Cuidado

Installation (continued)
6

Mounting the light fixture

NOTICE: The two pins on the rear of the light fixture must be
inserted into the terminal block for the light to work.
□
Align the top edge of the light fixture (B) with
the top edge of the mounting plate (D). Tilt the
light fixture (B) toward the mounting plate (D),
making sure the light fixture (B) is centered on
the mounting plate (D).
□
Tighten the large mounting bolt (EE) securely
through the center of the mounting plate (D). Do
not overtighten.
□
Push the rubber plug (AA) firmly into the
mounting bolt hole on the light fixture (B).
7
Caulking around the light
fixture
IMPORTANT: Failure to completely caulk around the gasket (HH)
and the mounting plate (D) could lead to water damage and is not
covered under warranty.
□
Caulk around the gasket (HH) and mounting
surface with silicone sealant (not included).
□
Caulk around the mounting plate (D) and
gasket (HH) with silicone sealant (not
included).
AA
NOTICE: When attaching this light to an external, surface mount
junction box, caulk around the inside of the light fixture (B) before
attaching to the mounting plate (D).
B
HH
D
7
Please contact 1-866-308-3976 for further assistance.
D
B
D
HH
HOMEDEPOT.COM