Add Camera By Manual Assignment - Urmet 1093/900 Guía Rápida De Configuración

Now the camera will be correctly displayed in LIVE grid.
4.2

ADD CAMERA BY MANUAL ASSIGNMENT

The procedure described in this paragraph represents an alternative to the one illustrated in the previous paragraph
(4.1).
To manually assign IP cameras to NVR channels:
1. Directly from the LIVE display grid or accessing before the OSD menu (default password: 00000000) at the
page [Display → IP Camera], click on the + button to add the IP camera to the respective channel, as
shown in the figure below:
DS1093-154A 26