Bellelli CLAMP Manual Del Usuario página 13

EN
PLACING THE CHILD IN THE SEAT
Press the button on the large central buckle (2) until you hear a click showing that the hook has been released
(fig. G).
Pull upwards to extract the buckle.
Seat the child.
Pull the safety belts down over the child's head (fig. H).
Fasten the large central buckle to the opening nearest the child (fig. I). Push the buckle all the way into the opening
until you hear a click.
Adjust the belt holders (3 and 4) on the safety belt so that the belt adheres to the child's body (fig. L).
Place the child's feet in the foot rests.
Close the strap (10) and fasten it to the pin on the back of the foot rest (fig. M).
When travelling, periodically check that the child is properly belted.
REMOVING THE CHILD FROM THE SEAT
Loosen the straps (10) restraining the child's feet.
Press the button on the large central buckle (2) until you hear a click showing that the hook has been released.
Pull upwards to extract the buckle.
Pull the safety belts up over the child's head.
MAINTENANCE
To maintain the functioning of the child seat and to prevent accidents we recommend the following: Check
regularly whether the fixation system of the Child seat on the bike is in perfect condition.
Check all components if they are damaged and if they work properly.
Never use the child seat if one of the parts is defective.
Damaged parts of the child seat must be replaced.
Contact a Bellelli authorized bicycle retailer to get the correct spare parts.
You can find these dealers on our website: www.bellelli.com.
If you had an accident with the bike and the child seat, and this does not show any visible damage at first glance,
we recommend to replace the child seat with a new one as a precaution.
Clean the seat with soap and water (do not use abrasive, corrosive or toxic products).
When not in use, keep the seat in a dry and dark location and at room temperature.
GUARANTEE
For the guarantee clauses, visit the website www.bellelli.com.
13