TP-Link AP300 Guía De Instalación Rápida página 9

3. Launch a web browser and enter http://tplinkap.net, then log in using admin (all
lowercase) for both Username and Password.
4. Click Quick Setup, then select Access Point mode and click Next. Follow the
step-by-step on-screen instructions to complete the configuration.
Now, reconnect your wireless devices to the new Wi-Fi network.
Repeater/Bridge Mode
The AP device extends the range of an existing Wi-Fi network.
Internet
Host AP
1. Connect the AP device according to steps A and B in the diagram.
2. Turn on the power and wait until the Power ( ) and Wireless ( & ) LEDs are lit
and stable, use the default SSID and Password printed on the product label to
join the AP device's Wi-Fi network.
3. Launch a web browser and enter http://tplinkap.net, then log in using admin (all
lowercase) for both Username and Password.
4. Click Quick Setup, then select Repeater/Bridge mode and click Next. Follow
the step-by-step on-screen instructions to complete the configuration.
5. Relocate the AP device to a good place. For details, you can refer to Q5 in
Frequently Asked Questions (FAQ).
Now, connect your wireless devices to the Wi-Fi network using the AP device's
SSID and password.
Host AP's SSID
AP500's SSID
A B
7
English