IOR Plug-in Module
3 CONTENTS OF THE PACKAGE
When receiving the product, check if this package
contains:
Accessory in anti-static packaging.
Installation, configuration and operation guide.
4 ACCESSORY INSTALLATION
The accessory is easily installed or replaced. For correct
installation of the accessory execute the following steps:
Step 1: With the inverter de-energized, remove the front
cover of the Inverter
Step 2: Remove the accessory (connected plug-in
module) if any, as in
Step 3: Fit and press the accessory to be installed as
indicated in
figure A.1 (b)
cover of the inverter.
Step 4: Power up the inverter and check if parameter
P0027 shows value 4 (P0027 = 4). If this information
is not true, check if the module used is actually the
CFW500-IOR500 and repeat steps 1-4.
6 | CFW500-IOR-B
(figure A.1
(a)).
figure A.1
(a).
and then assemble the front