Eco-Power/Standby Features; Setting The Clock; Sound Quality - Vieta Home VH-MS570BT Manual De Usuario

ECO-Power/Standby Features

Switching ON / OFF
When you first connect the unit to the DC Jack, the unit
will be in standby mode.
• Press the standby button to switch the unit on. The
word "HELLO" will show in the display.
• Press the standby button to switch the unit back to
standby mode. The words "BYE BYE" will scroll across
the display.
Switching the system to ECO Power/Standby
mode
Press and hold the standby button for 2 seconds
or more to switch to ECO Power Standby or normal
standby.
* ECO Power standby mode
The clock will not be displayed. Press the CLOCK button
to display the clock on the LCD.
* Normal standby mode
The clock display on the LCD.

Setting the Clock

Setting the Clock Manually
Caution: You can set the clock in standby mode only.
1. In standby mode, press and hold the CLOCK button,
the VFD will display CLOCK SET and CLOCK 12 begins
to blink.
2. Set the 12/24 hour format with the VOL- or VOL+
button.
3. Press the CLOCK button, hour indicator will blink.
4. Set the hour with the VOL- or VOL+ button.
5. Press the CLOCK button, minute indicator will blink.
6. Set the minute with the VOL- or VOL+ button.
7. Press the CLOCK button, the built-in clock starts
operating.
Note:
• To exit clock setting mode without storing, press the
button.
• If no button is pressed in 90 seconds, the unit exits
clock setting mode automatically.
• If a power failure occurs or the unit is disconnected
from the mains, the clock setting will be lost.
30
All manuals and user guides at all-guides.com
Setting the Clock Automatically
Tune into a RDS station, press and hold the DISPLAY
button. The clock will automatically update.
Display the Clock
In any source mode, the built-in clock shows the time on
the display by press the CLOCK button.

Sound Quality

Adjusting the Volume
To increase or decrease the volume, rotate the -VOLUME
+ knob on the unit or press the VOL +/- buttons on the
remote control.
Adjusting the Super Bass
You can reinforce the bass sound to maintain rich, full
bass at low volume.
Press the S-BASS button on the remote control to get
the effect, the "
S-BASS button again to cancel the effect.
Controlling the Loudness
This unit has a loudness function, which can
automatically increase the bass sound effect at low
volume. It can also increase the bass sound effect at
high volume, but it will be relatively less when it is at
high volume. Press the LOUDNESS button to obtain
the loudness function, the "
panel, press again will disappear.
Presetting Equalizer
You can adjust the sound reproduced simply by
choosing from 5 preset equalizers.
During play, press the P-EQ button on the remote
control repeatedly to select:
• [FLAT] (FLAT)
• [POP] (pop)
• [JAZZ] (jazz)
• [ROCK] (rock)
• [CLASSIC] (classic)
Changing the Front Panel Darkness
This unit has three brightness levels for you to adjust
the clock display. Press the DIM button on the remote
control repeatedly to choose the desired brightness.
" will lit on the front panel. Press the
" will display on the front
CD Microsystem