Bluetooth Connecting With Solar Stone Glow; Connecting To One Solar Stone Glow; Linking Two Solar Stone Glows To Each Other For Stereo Sound - ION Solar Stone Glow Guia De Inicio Rapido

Bluetooth Connecting with Solar Stone Glow

Connecting to One Solar Stone Glow

1. Power on Solar Stone Glow by holding down the power button. You will hear "Power On" for
confirmation. *
2. Press the Bluetooth Connect button briefly to enter Connecting Mode—the Bluetooth LED will
blink fast, and you will hear "Pairing" to indicate this. *
3. Navigate to your device's Bluetooth setup screen, find Solar Stone Glow, and connect.
Bluetooth LED will light up solid when it is connected and you will hear "Pairing successful,
connected" for confirmation. *
Note: If you experience trouble in connecting, select "Forget this Device" on your Bluetooth
device and try to connect again.
4. To disconnect, hold the Bluetooth Connect button on Solar Stone Glow. You will hear
"Disconnected" for confirmation. *
5. If your Bluetooth device is not able to connect to Solar Stone Glow, hold the Bluetooth Connect
button on the speaker to break previous Bluetooth connections and reset the Bluetooth module.

Linking Two Solar Stone Glows to Each Other for Stereo Sound

Note: Ensure that the speakers are not already Bluetooth connected in single mode. If either of them
is connected, hold the Bluetooth Connect button to disconnect and then follow the steps below.
1. Power on each Solar Stone Glow by holding down their power buttons. You will hear "Power
On" for confirmation. *
2. Press the Link button on each Solar Stone Glow. The speakers will search for each other while
playing an intermittent tone. Once the stereo pair is successfully linked, you will hear "Pairing
successful, connected" followed by "Left channel" and "Right channel" on the respective
speakers. *
This process may take up to 2 minutes the first time two speakers are linked. Speakers that were
previously linked will relink automatically in a few seconds if powered on in range of one another.
Note: Solar Stone Glows should be within 30 ft. (9 m) of each other to Link properly.
3. On the Left speaker, the Bluetooth LED will blink. Press the Bluetooth Connect button briefly
to enter Bluetooth Pairing mode.
Note: The Left speaker will be the "master" speaker, and the unit from which the Bluetooth
range will be determined.
4. Navigate to your device's Bluetooth setup screen, find Solar Stone Glow, and connect. You will
hear "Connected" for confirmation. *
Note: If you experience trouble in connecting, select "Forget this Device" for Solar Stone Glow
on your Bluetooth device and try to connect again.
5. To disconnect linking, hold the Link button on the "master" Solar Stone Glow for 2 seconds. You
will hear "Disconnected" for confirmation. *
6. If your Bluetooth device is not able to connect to Solar Stone Glow, hold the Bluetooth Connect
button on the speaker to break previous Bluetooth connections and reset the Bluetooth module.
Note: When two speakers are linked, hold the power button on the "master" speaker to turn
both speakers off. If you want to only turn off the "slave" speaker, press and hold the power
button on that speaker. The speakers will relink automatically the next time they are both
powered on.
* Tip: If you would like to disable (or enable) the voice prompts, simultaneously press the Bluetooth
Connect and Link buttons briefly.
FCC Statement
Warning: This product shall be installed and operated with a minimum distance of 20 cm between the radiator and user body.
5