JABSCO ITT 52700 Guia De Instalacion página 2

Washdown Pump
ULTRA WASHDOWN PUMP
80 PSI (5.5 BAR) / 7.0 GPM (26.5 LPM)
FEATURES
High Pressure / High capacity
l
Suitable for Use in Salt Water
l
Corrosion Resistant
l
Dry Running Capability
l
Long Life Sealed Motor
l
SPECIFICATIONS
Pump – Glass Filled Nylon
l
Pump Design – 5 Chamber Diaphragm
l
Suction Lift – Self Priming to 8 ft. (2.5 m)
l
Ports 3/4" (19 mm) Hose Barb
l
3/4" (19 mm) Hose Barb 90° elbow
Motor – Permanent Magnet
l
ISO 8846 MARINE (Ignition Protection)
l
WARNING – FIRE AND EXPLOSION HAZARD
DANGER – REDUCE THE RISK OF ELECTRIC SHOCK
NOTE: Always follow all electrical and safety codes,
in accordance with the most recent National
Electrical Code (NEC), ABYC E-11, AC and DC
Electrical Systems on Boats.
CAUTION – BURN HAZARD
Model Voltage
No
52700- 12v
xx92
52700- 24v
xx94
Installation site must be well
vented and free of all flammable
materials and fluids (fuel, oil,
kerosene, etc) from area. Failure to
comply may result in fire, damage
to the pump and /or personal
injury or death.
Disconnect power from the system
before working on the unit to
avoid personal injury, damage to
the surrounding environment and/
or damage to the unit.
Motor case could get hot during
extended operation. Prolonged
contact with skin may cause a
burn.
Max Open
Amp Flow
Draw GPM
(LPM)
28 7.0
(26.5)
14 7.0
(26.5)
Switch Inlet
Max PSI Strainer
(bar)
80 YES
(5.5)
80 YES
(5.5)
Circuit
Breaker
YES
NO