Storage When Not In Use; Troubleshooting - Silvercrest STS 1000 A1 Manual De Instrucciones E Indicaciones De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

To clean the casing, use a slightly damp cloth. Never use any solvents or cleaners that may
damage the plastic.
Remove and empty the crumb tray (9). Clean the crumb tray (9) with a slightly moistened cloth if
necessary. Push the crumb tray (9) back in until you hear it slot into place.
You can clean the roll holder (2) with the washing up. Dry the roll holder (2) well after cleaning.

9. Storage when not in use

When you do not wish to use the toaster, disconnect the mains plug from the mains socket. Wind
the power cable (10) in the direction shown around the cable winder (8) underneath the toaster.
Store the toaster a clean, dry place out of direct sunlight.

10. Troubleshooting

The toaster does not work or the start lever (3) will not engage.
Check that the mains plug is correctly inserted into the mains socket.
The toast is too light.
Check the setting of the control dial (7) and increase the level of browning as necessary.
The toast is too dark.
Check the setting of the control dial (7) and decrease the level of browning as necessary.
The toast is not ejected or gets stuck.
The bread you are using is too thick. Do not use slices which are too thick.
If the bread still gets stuck in the toast slot (1), try gently pushing the start lever (3) upwards to
push the bread out of the toast slot (1).
SilverCrest STS 1000 A1
English - 57

Publicidad

Tabla de contenido
loading

Tabla de contenido