Publicidad
Idiomas disponibles
Idiomas disponibles
GB
1
2
3
1. LCD
2. Button of Pulse Recovery
3. Button of Down
4. Button of Body Fat
5. Button of Up
6. Button of Start/Stop
7. Button of Enter
8. Battery Compartment
9. Screws for meter installation
10. Pulse connector
11. Cycle connector
The things you should know before exercising
A. Input Power
Plug in the adaptor to the equipment then the computer will produce a beep sound and turn on the computer at
the Manual mode.
B. Program select and setting value
1. Use the UP or DOWN keys to select program mode and then press ENTER to confirm your exercise mode.
2. At the Manual mode, the computer will use the UP or DOWN keys to set up your exercise TIME, DISTANCE,
CALORIES, PULSE.
3. Press the START/STOP key to start exercise.
4. When you reach the target, the computer will produce beep sounds and then stop.
5. If you set up more than one target and you would like to reach next target, press START/STOP key to keep on
exercise.
Functions and Features:
1. TIME: Shows your elapsed workout time in minutes and seconds. Your computer will automatically count up from
0:00 to 99:59 in one second intervals. You can also program your computer to count down from a set value by
using the UP and DOWN keys. If you continue exercising once the time has reached 0:00, the computer will
begin beeping, and reset itself to the original time set, letting you know your workout is done.
4
5
6
7
8
9
10
11
Publicidad
