10
Care and maintenance
10.1 General notes
First switch off the appliance and remove the ignition
key before performing any cleaning or maintenance
tasks on the appliance, replacing parts or switching
over to another function.
The battery must be disconnected prior to working on
the electrical system.
Lock parking brake.
Maintenance work may only be carried out by approved
customer service outlets or experts in this field who are
familiar with the respective safety regulations.
10.2 Panels
10.2.1 Remove/attach engine panels
WARNING
Risk of burns Let the appliance cool off before removing
the covers.
1 Side engine panel
2 Radiator grid
The completion of the difference maintenance tasks, the
engine panels must be removed.
10.2.2 Remove the engine's side panels
1 Cover lock
Open both hood latches.
Raise the panels and swivel them to the top and out.
Remove panels.
10.2.3 Install the engine's side panels
1 Fastening bushing
2 Centering cone
Thread the bottom end of the panel behind the wheel.
Swivel the panel up to the appliance and hook the top
edge of the panel into the fastening bushing.
Close the hood latches.
10.2.4 Remove the radiator grill
1 Lock
Open both latches (pull the latch out, rotate about 90°
and release).
Swivel the radiator grill toward the top, pull up and re-
move.
19
-
EN
51