BaByliss PRO BAB880C Instrucciones De Operación página 5

ADJuSTABLe TAPeR LeVeR
The taper lever is positioned at your thumb. You can hold
the clipper in your hand and adjust the lever at the same
time – while you are clipping.
The taper lever adjusts the closeness of the cut from
a close cut with the taper lever in the up position, to
a longer length cut with the taper lever in the down
position. To increase cutting length, slowly push the lever down. To cut closer, push
the lever up. As different cutting edges are used in each setting, using the taper lever
lengthens the life of the clipper blades.
Too much hair can slow down hair clippers. Keep the clipper on for removing hair but
not the blades. Then push the taper lever back and forth quickly for several times. If
you do this every time, especially after much hair cutting, the clipper blades should
remain free of cut hair. Oil the blades after the above procedures.
BAB880C IB-13_279A.indd 9-10
WARNING:
IF yOu THINK THe POWeR IS OFF
WHeN THe SWITcH IS OFF,
yOu'Re WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination.
But did you know that an electrical appliance is still electrically live
even if the switch is off? If the plug is in, the power is on.
So when you are not using the appliances, keep them unplugged.
ALWAyS uNPLuG SMALL APPLIANceS
WHeN NOT uSING.
2/2/15 11:30 AM