Publicidad
Enlaces rápidos
®
ASME A112.18.1 / CSA B125.1
ASME A112.18.2 / CSA B125.2
Model/Modelo/Modèle
B510LF/B512LF/B501LF
B5110LF-PPU/B510LF-PPU
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
For easy installation of your Delta
faucet you will need:
‡ To READ ALL the instructions completely
before beginning.
‡ To READ ALL warnings, care, and maintenance
information.
‡ To purchase the correct water supply hook-up.
Para instalación fácil de su llave Delta
usted necesitará:
‡ LEER TODAS las instrucciones completamente
antes de empezar.
‡ LEER TODOS los avisos, cuidados, e
información de mantenimiento.
‡ Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Delta
facilement, vous devez:
‡ LIRE TOUTES les instructions avant de débuter;
‡ LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
‡ Acheter le bon nécessaire de raccordement.
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
1
1/8"
(3.2 mm)
?
2/10/11 Rev. F
Publicidad
Manuales relacionados para Delta B510LF Serie
Resumen de contenidos para Delta B510LF Serie
- Página 1 ‡ To READ ALL warnings, care, and maintenance information. ‡ To purchase the correct water supply hook-up. Para instalación fácil de su llave Delta usted necesitará: ‡ LEER TODAS las instrucciones completamente antes de empezar. ‡ LEER TODOS los avisos, cuidados, e información de mantenimiento.
- Página 2 MAKE ANY OTHER WARRANTY OF ANY KIND, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement This warranty excludes all industrial, commercial &...
- Página 3 Specify Finish Especifíque el Acabado Précisez le Fini RP42986 Handle w/Set Screw and Button Perilla con Tornillo de Ajuste y Botón Manette avec Vis et Bouton Adjusting Ring Anillo de Ajuste Anneau de Réglage RP44123 Repair Kit Equipo/Herramientas para reparaciones Kit de réparation Ball Assembly Ensamble de la Bola...
- Página 4 SHUT OFF WATER SUPPLIES. Slide washers (1) in place under sink and between nuts, with slotted Place gasket (1) on bottom of new faucet. Assemble nuts (2) to studs. openings around tubes. Secure faucet to sink by tightening nuts (2) Place faucet through mounting holes in sink.
- Página 5 Metal Pop-Up installation Remove stopper (1) and flange (2). Screw nut (3) all the way down. Apply silicone to underside of flange (1). Insert body (2) into sink. Screw Push washer (4) and gasket (5) down. Remove tailpiece (6) from flange (1) into body (2).
- Página 6 Plastic Pop-Up installation Remove stopper (1) and flange (2). Screw nut (3) all the way down. Apply silicone to underside of flange (1). Insert body (2) into sink. Push black gasket (4) down. Screw flange onto body. Pivot hole (3) must face back of sink. Tighten nut/gasket, clean excess silicone.
- Página 7 CONNECT TO WATER SUPPLIES. (HOOK-UPS NOT PROVIDED). FLUSH SYSTEM/CHECK FOR LEAKS. Determine which type of connection you will be making. Remove aerator (1) and turn faucet handle (2) all the way on. Turn on hot (1) Ball nose risers (3/8" O.D. copper tubing) with coupling nuts (A) and cold water supplies (3) and flush water lines for one minute.
- Página 8 65590 Rev. F...