Adjusting The Helmet; Before Donning - MSA Gallet F1XF Manual De Instrucciones

Adjusting the Helmet

The Declaration of Conformity can be found under the following link: https://MSAsafety.com/DoC.
75
70
65
60
55
50
45
40
35
1600
The protection against radiating heat ensured by the face shields varies with the temperature of the
heat source, see figure above. It is recommended to only use the face shield when the face shield can
reduce the heat exposure to the wearer's eyes to less than 100W/m2.
When fitted with another item of personal protective equipment or with an accessory, (other than as
supplied by the helmet manufacturer for use with this helmet) a helmet marked as complying with
EN 443 might no longer satisfy all clauses of the standard. Refer to information supplied by the helmet
manufacturer.
3 Adjusting the Helmet
3.1

Before Donning

GB
(4) Adjust rear headband by rotating to optimise
fit on back of the head.
6
Radiant heat protection
1800 2000 2200 2400
Source Temperature (K)
WARNING!
GA1086A
GA1086B
2450 2600 2800 3000 3200
(1) Choose helmet size M or L (see Technical
Data) according to your head size.
(2) Adjust front headband by sliding it up or
down.
(3) Position front headband inside the helmet to
avoid contact between headband and mask.
®
Gallet F1XF