Specifications - Sony NT-2 Manual De Instrucciones

Specifications

General
28
-EN
Format
Tape
Recording system
Recording head
Recording time
Tape speed
Drum rotation
Error correction
Track pitch
Sampling frequency
Modulation system
Number of channels
Quantization
Frequency response
Signal-to-noise ratio
Dynamic range
Total harmonic distortion
Wow and flutter
Input
Jack type
stereo minijack
MIC
stereo minijack
LINE IN
Output
Jack
type
stereo
HEADPHONES
minijack
stereo
LINE OUT
minijack
NT format
Digital micro tape (NT cassette tape)
Helical scan 2 heads, digital recording
4 heads
60 minutes (with the supplied NTC-60)
Approx. 6.35 mm/s
Approx. 3000 rpm
Cross-interleaving code
Approx. 9.8 µm
32 kHz
LDM-2
2-channel, stereo
12-bit non-linear (equivalent to 17 – bit)
10 Hz to 15,000 Hz (+1, –3dB)
More than 80 dB (1 kHz, IHF-A, 20 kHz
LPF, LINE IN)
More than 80 dB (1 kHz, IHF-A, 20 kHz
LPF, LINE IN)
Less than 0.08%
Below measurable limit (less than 0.001%
W.PEAK)
Rated input
level
1.38 mV
160 mV
Rated
Maximum
output level
output level
—
5 mW +
5 mW
160 mV
—
Minimum
input level
0.55 mV
64 mV
Load
impedance
16 ohms
47 kohms