ARIETE JETFORCE Manual De Instrucciones página 9

DESCRIPTION OF THE APPLIANCE (Fig. 1)
1
Foot-operated cord rewinder button
2
Release buttons
3
Foot-operated on/off switch
4
Dust container lock/release button
5
Dust container handle
6
Suction device coupling
7
Dust container
8
Appliance body
9
Outlet air filter housing
10 Top carry handle
ATTACHMENTS
Floor brush (11)
Ideal for cleaning any type of surface. Use the device on the top of the attachment to:
- retract the bristles when cleaning carpets or rugs;
- lower the bristles for smooth floors such as PVC, parquet or tiles.
Small suction device with brush (16)
This can be used to remove dust from books or other delicate items, such as picture frames, etc.
It is suitable for cleaning upholstered furniture, mattresses, cushions, curtains, etc...
This attachment can also be fitted directly to the handle (18).
Narrow suction nozzle (17)
This suction device is ideal for cleaning between the folds on fabrics, joints, corners or niches that
are impossible to reach using the floor cleaning device. This attachment can also be fitted directly
to the handle (18).
VACUMM CLEANER ASSEMBLY
WARNING: Before fitting or removing the attachments, always make sure that the vacuum cleaner
has been unplugged from the power mains.
- Fit the suction device (14) into the air inlet opening (6) and press it in until it clicks into place. To
remove it, it is necessary to press the two release buttons (2) at the same time and to pull it out
(Fig. 2).
- Insert the telescopic tube (12) into the handle (Fig. 3).
- Push the slider device (13) forwards and pull the bottom section of the tube out to the required
length (Fig. 4). Then simply release the slider and the device will return to its original position.
- Fit the required attachment to the telescopic tube.
11 Floor brush
12 Telescopic tube
13 Slider device
14 Suction device
15 Attachment storage compartment
16 Small suction device with brush
17 Narrow suction nozzle
18 Handle
19 Manual air inlet valve
- 7 -
EN