Out Of Range; Master Reset - Sony Ericsson MBW-150 Manual Del Usuario

To turn the Bluetooth function on or
off
1
When the display is dimmed, press the
bottom key once to select
2
Press the right top key to change
between on
If battery level is low, the Bluetooth
function is automatically turned off.
Turn the Bluetooth function on again
when the battery is fully charged.

Out of range

When the phone is out of range the
watch vibrates and the
appears.
2 m (6.6 ft.)
Optimal performance
Limited performance
This is the Internet version of the User guide. © Print only for private use.
.
and off .
icon
The out-of-range distance varies and
depends where you are. The
connection may be improved if there
are no solid objects between your
watch and phone.
If you are out of range more than
24 hours, reconnect to the phone
again by pressing the right top key
on the watch.
To change out-of-range notification
status
1
Press the bottom key repeatedly to
select .
2
Press the right top key to change
between on

Master reset

Set the watch to factory default
settings and delete changes you have
made.
To reset the watch
1
Enter pairing mode
2
Press and hold the right top and
bottom key until the display lights up.
After a few seconds the display dims
again and your watch is reset.
Pairing the watch after master reset
To pair your watch with a phone after
a master reset
and off .
7 Pairing mode.
6 Pairing.
English 11