Neumann MINIMISSION Manual Del Usuario página 6

6
EN
1. Turn power off: take Minimission
2. Turn power on.
3. If the error message is still displayed; turn power off; turn Minimission
if there's anything preventing the wheels from rotating.
4. Remove any possible obstruction, turn Minimission
1. Turn power off.
2. Take Minimission to a lawn area free from obstacles.
®
3. Turn power on.
4. If the error message is still displayed; turn power off; turn Minimission
check if there's any debris causing a blockage in the top cover.
5. Remove any possible obstruction, turn the Minimission
1. Turn power off.
2. Take Minimission to a lawn area clear of obstacles, turn power on.
®
3. If the error message is still displayed: turn power off, turn Minimission
check there's nothing lifted up.
4. Remove any possible object, turn Minimission
1. Turn Minimission upright.
®
2. If still not work,
Firstly, position the mower on a horizontal surface.
Press Key "2" to enter the diagnosis interface, and press
Key "5" for a few seconds until the three numbers 1 2 & 3
highlighted below turn back to zero. (See Fig. A)
1. The contact between the Charging and Contact Pins may be obstructed in some way.
2. Wipe off the Charging and Contact Pins, making sure there is not an object obstructing
them, then place your Minimiss
connection.
1. This means that there is low battery voltage.
2. In this case you must turn
"charging" will be shown on screen, which means it starts charging.
in an area free from obstacles.
®
upright, turn power on.
®
®
upright, turn power on.
®
on in the charging base and check that the Pins make good
i ®
off and place it in the Charging Base, then
Minimission
®
upside-down and check
®
upside-down and
®
upright, turn power on.
upside-down and
®
A A A
1 1 1
2 2 2
3 3 3