Comfort Glow QF4570R Instrucciones De Instalación Y El Manual De Propietario página 7

Or
3. Setting flame effect
Or
4. Setting timer-power- off
Note: The Power-Off-Timer Function will allow for the heater to power OFF after a certain set time, and
can only be set while the heater's display is in the "On" position.
Or
5. Setting timer-power-on
Note: The Power-Off-Timer Function will allow for the heater to power OFF after a certain set time, and
can only be set while the heater's display is in the "off" position.
Press °C/°F button, then digital display will indicate
Fahrenheit value or Celsius value.
When Fahrenheit indicator light is on, digital display
indicates Fahrenheit value,
When Celsius indicator light is on, digital display indicates
Celsius value.
Adjust the brightness of the flame or turn off flame effect by
pressing the flame button on control panel or the remote.
When starting the unit, press the timer button on the
control panel or remote control.
Adjust the time by pressing the arrows on the control
panel or remote control.
Digital display turns set temperature to time value for the
timer. Press the UP or DOWN button. The value will vary
from 0 to 12hr (1 hr intervals) in circulation.
The light is on when timer –power-off is set.
While powered-off, press the timer button on the control
panel.
Adjust the time by pressing the arrows on the control
panel or remote control.
7