Grounding Instructions - Versaclean 200MP Manual Del Usuario

Use with grounded outlet only
Do not remove
ground prong

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should
malfunction or break down, grounding provides a path of
least resistance for electric current to reduce the risk of
electric shock. This appliance is equipped with cords
with equipment-grounding conductors and grounding
plugs. The plugs must be inserted into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING! Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service
person if you are in doubt as to whether the outlets
are properly grounded. Do not modify the plugs
provided with the appliance – if the plugs do not fit
the outlets, have proper outlets installed by a
qualified electrician.
This equipment is for use on a circuit or circuits having a
nominal rating no more than 120V and is factory-
equipped with a specific electric cord and plug to permit
connection to a proper electric circuit. Make sure that the
appliance is connected to outlets having the same
configuration as the plugs. No adaptor should be used
with this appliance. If the appliance must be reconnected
for use on a different type of electric circuit, the
reconnection should be made by qualified service
personnel.
WARRANTY
The warranty is valid from the date of purchase for one
year. This will cover parts and labor at an authorized
Legend Brands distributor. The warranty is only valid to
the original purchaser and proof of purchase is required.
Modifying this unit or not maintaining the machine as
outlined in this manual will void the warranty. See the full
Limited Warranty document for details.
SET UP FOR CARPET CLEANING
Step 1: Attach blue solution hose to solution coupler
(Fig. 1A). Slide sleeve back, insert metal end of hose,
then slide sleeve forward until it clicks into place.
Attach gray vacuum hose to inlet (Fig. 1B).
Step 2: Attach hoses to wand.
Step 3: Plug in the power cord.
07-02091D F561-MP
FIG. 1: Front View
A
A
A Solution hose quick-connect
B Vacuum hose attachment
C Recovery tank cover
D Recovery tank gravity drain hose
E Cover retention nut.
NOTE: For flood extraction, skip to Flood Extraction
instructions.
Step 4: Pretreat heavily-soiled areas. Follow product
instructions.
Step 5: Add 10 oz. cleaning product to fresh water tank
(Fig. 2A). Fill tank with 10 gallons of hot tap water.
Step 6: Select Clean Extract mode (Fig 3).
Step 7: Squeeze the trigger while sliding the wand 4 ft.
forward and back. Do not overwet carpet. Release
trigger and slide want over each section at least 2 times.
Step 8: Drain waste water directly into toilet.
CAUTION: If you see excessive foam in the recovery
tank, stop extracting and add VersaClean Defoamer
to the tank immediately. Excessive foam can allow
moisture, carpet fiber and other debris to cause
damage to the vacuum motors and void the product
warranty. Foaming may occur because of residues
left from previous cleanings. Follow VersaClean
Defoamer instructions for proper application.
2
C
C
B
D
D
A
E
VersaClean