HHB CDR-850 Instrucciones De Operación página 26

3 1
FADER
REPEAT
4
1
1
MENU
2
3
SKIP ID
SET
4
26
<PRE1282>
En
2
4
TRACK NO.
WRITE
2
2 3
CLEAR
CONNECTION WITH OTHER EQUIPMENT
Balanced output level setting.
In the MENU the output reference level of the unit may be
set, this applies only to the balanced (XLR type) connectors.
1
Press the MENU button until "O-LEV" is
displayed.
2
Press the 41 ¡¢ (search) buttons to
select the required reference level of the
balanced output signal. HI level is +4dBu, LO
level is –8dBu.
• Initial setting is LO
• When the original setting is changed, a question mark "?"
appears on the screen next to the selected option.
3
Press the SKIP ID SET button to memorize the
setting.
• The question mark "?" is removed from the display and the
new setting is memorized.
4
Press the 7 button to exit the menu mode.