Remington BKT4000 Manual Del Usario página 4

ENGLISH
C GETTING STARTED
, Note: It is recommended to fully charge your appliance before using for the
first time. Please refer to the charge times shown in this book.
• Ensure the product is switched off.
• Connect the adaptor to the product and then to the mains.
, CHARGE LEVEL INDICATORS
Charge Level
Charging
Fully charged
• Run time from fully charged is up to 60 minutes.
• Charge time from empty is 4 hours.
, Note: To preserve the life of your batteries, let them run out every 6 months
then fully charge.
F INSTRUCTIONS FOR USE
• Select the desired trim length prior to trimming by attaching one of the
comfort combs.
• If trimming longer hair, or if trimming for the first time, always start with the
longest length comb (4mm) and work your way down to shorter lengths until
you reach your desired style.
• Always ensure the trimmer is switched off before attaching or removing a
comb.
• Switch the shaver on by pressing the on/off switch.
, CHANGING THE ATTACHMENTS
• To attach a comb, place it on top of the trimmer with the teeth of the comb
over the main trimmer. Slide the comb down until it clicks into place.
• To remove the comb, pull the sides of the comb where it connects to the
trimmer out and lift the comb away from the trimmer.
, Note: Using the detail trimmer with no comb attached will trim down to
0.2mm.
• Using the main trimmer with no comb attached will trim hair to 1mm.
• Holding the main trimmer upright on the skin will trim hair to 0.4mm.
4
Indicator
LED will illuminate
LED will remain
illuminated