Network Menu Basic Settings; Or Ip; Port; Mask - urmet domus 1093/061S Guía Rápida

This page contains the basic menu settings.
Select "ADVANCED SETTINGS" and press "ENTER" to access advanced settings.
The selected item is highlighted.
Press arrows "◄►▲▼" to point the cursor to the various menu items.
Point the cursor to the required item and press "ENTER" to edit it. Use buttons "▲▼" to change the available options for the
selected menu item.
Select "CONFIRM" and press "ENTER" to make the changes effective.
Select "CANCEL" and press "ENTER" to cancel the changes.
Press "ESC" to go back by one step.
Press "ESC" several times until the configuration window closes to quit the configuration menu.
2.4.1

NETWORK MENU BASIC SETTINGS

2.4.1.1 IP
This menu option is used to set the DVR IP address.
Press "EDIT" and use the number keys 0-9 to enter the IP address. Use "◄►" to shift the cursor. Press "EDIT" to cancel. Press
"ENTER" to confirm or "ESC" to cancel.
The entered IP address must not be in conflict with other IP addresses.
If there is a DHCP server in the network, address "0.0.0.0" can be set. Save and reboot the device. While rebooting, the device
will connect to the server and obtain a dynamic IP address displayed in the IP field.
IMPORTANT NOTE
It is advisable to assign a static IP address to the device.
2.4.1.2

Port

This menu option is used to set the port number used for image transmission. The entered number must be higher than 2000.
The default setting is 8000.
Press "EDIT" and use number keys 0÷9 to enter the port number. Use "◄►" to shift the cursor. Press "EDIT" to delete. Press
"ENTER" to confirm or "ESC" to cancel.
2.4.1.3

Mask

Use this option to set the subnet mask of the device.
Press "EDIT" and use number keys 0÷9 to enter the mask number. Use "◄►" to shift the cursor. Press "ENTER" to confirm or
"ESC" to cancel.
2.4.1.4

Gateway

This option can be used to set the gateway of the device.
Press "EDIT" and use number keys 0÷9 to enter the address. Use "◄►" to shift the cursor. Press "ENTER" to confirm or "ESC"
to cancel.
2.4.1.5

Http port

This option can be used to set the port number used for the Internet Explorer browser. The default setting is 80.
Press "EDIT" and use number keys 0-9 to enter the port number. Use "◄►" to shift the cursor. Press "ENTER" to confirm or
"ESC" to cancel.
2.4.1.6

PPPoe

This option is used to enable PPPoE dial- up functions.
To enable, select the respective check box using "◄►" and press "ENTER" or "EDIT".
Symbol " " indicates that the PPPoE function is enabled; symbol "×" indicates that it is not.
The following can be defined after enabling the "PPoE" option:
user
password
verify
This option is used to enter the user name for PPPoE authentication.
The user name may consist of up to 32 characters.
This option is used to enter the password for PPPoE authentication.
The password may consist of up to 14 characters.
This option is used to enter the password again for PPPoE authentication.
DS1093-022
User
Password
Verify
42