Cleaning Machine After Use
WARNING
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
1
Unplug the unit.
3
Remove tank vent & foam
filter (located on top of the
Collection Tank) and rinse.
5
Remove lint and hair from
red gasket in base of unit.
(Do not remove gasket)
NOTICE: To reduce the risk of a leaking condition, do not store unit where
freezing may occur. Damage to internal components may result.
10
www.BISSELL.com
2
Remove and rinse the Collection Tank thoroughly.
4
6
To remove and clean the
nozzle, keep the Collection
Tank off of the unit.
Gently pull the two tabs that
point up near the front of the
unit. The nozzle will unhook to
remove. Rinse under running
water. When finished, slightly
tilt the machine so the foot
raises up so you can align the
nozzle hooks at the floor of
the unit. Rotate the nozzle up
to clip back into place.
Once the parts have been
rinsed clean and dried,
replace the Collection Tank
to the base of the machine
and secure with both latches.
Wrap power cord around
Quick Release Cord Wrap™
on side of the machine. Wipe
all surfaces with a soft cloth
and store cleaner upright in a
protected, dry area.