Know Your Pressure Washer - GreenWorks GPW 1951 Manual Del Operador

The safe use of this product requires an understanding of the information on the tool and in this
operator's manual as well as a knowledge of the project you are attempting. Before use of this product,
familiarize yourself with all operating features and safety rules.
Trigger and Wand Assembly
High Pressure Hose
Tip Storage
dETERGENT TANK
Remove the cap from the detergent tank to add detergent to the pressure washer.
GFCI PLUG
The pressure washer is equipped with a GFCI plug to guard against the hazards of ground fault
currents. This plug does not protect against short circuits, overloads, or shocks.
HIGH PRESSURE HOSE STORAGE
A convenient hose reel stores the high pressure hose when the pressure washer is not in use.
AUTO ON/OFF SWITCH:
This pressure washer is equipped with an Auto Start/Stop feature. To operate: Rotate power switch
to the On (I) position. Pump will pressurize and shut down immediately. Once the trigger of the gun is
depressed the unit will turn on. Unit will shut off and be in standby mode when trigger is released.
POWER CORd STORAGE
The power cord can be wrapped and stored around the hooks.
TRIGGER ANd WANd ASSEMBLY
The Trigger and Wand allows you to operate the pressure washer by depressing the trigger to activate
the pump to spray water using the desired spray tip.

KNOW YOUR PRESSURE WASHER

(See Figure 2.)
Detergent Tank
Power Cord Storage
ON/OFF Switch
EN - 9
Wheel
Fig. 2