Product Description - Niko 10-490-01 Manual Del Usario

10-490-01
Please read the complete guide before use.

1. PRODUCT DESCRIPTION

External surface mounted camera 10-490-01 from the Access Control Standard range is an essential component of a system with one or more
video internal units and a power supply from the Niko Access Control Standard range.
The external surface mounted camera can be integrated into the system as a stand-alone device or in combination with an audio external unit. With a
video switcher the system can also be extended to accommodate multiple cameras.
More information about the integration of the product into a complete system can be found in the technical catalogue.
More information about calling up the video images from the external surface mounted camera in a system can be found in the manual of the video
internal unit.
External surface mounted camera 10-490-01 is provided with:
• an adjustable focus lens;
• IR LEDs for better visibility at night.
2. COMPONENTS
Basic components
The external surface mounted camera package contains the following components:
• Turnable and adjustable camera;
• Protective cover;
• Two socket wrenches.
➍
➌
➎
➏
fig.1
Cabling
External surface mounted camera 10-490-01 requires 6-wire cabling.
Use a twisted cable to ensure optimum quality of the video image.
Another important factor is the diameter of the conductors as it determines the maximum distance that can be bridged between the power supply
and the video internal unit.
Niko recommends to use the following cables for installation of external surface mounted camera 10-490-01:
• JYSTY (-F2) min. 3x2x0.8mm (max. distance 200 m);
• TVVF (-F2) min. 3x2x0.8mm (max. distance 200m);
• TPVF min. 3x2x0.6mm (max. distance 100m);
• UTP/FTP/STP 4x2x0.5mm (max. distance 70m).
EN
➊
➐
➑
➒
➓
➏
➊
Protective cover
➋
IR LEDs
➌
Front panel
➍
Rear panel
➎
Cover plate
➏
Screws to open the camera
➐ ➑
and Screws to adjust the orientation of the camera
➒
Ring to adjust the zoom function
➓
Ring to focus the camera image
➋
13