Using The Device; Positioning The Device - Philips BlueTouch PR3733 Manual Del Usuario

ENGLISH
12
1 Insert the standard USB plug into the socket of the adapter.
2 Insert the adapter into a wall socket (100V-240V).
3 Insert the micro USB plug into the socket on the BlueTouch Pain
Relief Patch.
Caution: Only use this micro-USB socket to connect the BlueTouch Pain
Relief Patch to the mains for charging. Do not connect any other cable
with a micro-USB plug to this socket.
, When you connect the BlueTouch Pain Relief Patch to the mains,
it beeps once to indicate that charging starts. The charging light on the
connection panel flashes green slowly and regularly during charging.
4 When the battery is fully charged, the charging light turns solid green.
5 Remove the adapter from the wall socket and pull the USB plug out
of the micro USB socket of the BlueTouch Pain Relief Patch.

Using the device

Positioning the device

You position the BlueTouch Pain Relief Patch on your body with one of the
straps supplied with the device. There is a special strap for treatment of the
upper back and a special strap for treatment of the lower back.
Note: Do not wear multiple layers of clothing or tight or thick clothing over the
BlueTouch Pain Relief Patch.