Tabla de contenido
Publicidad
ENGLISH
From AUX to SD/USB
The system is capable to convert audio signal from AUX input to MP3 format and store in USB mass storage device or
SD card (default USB if both devices are detected).
1. Press FUNCTION /
once or more to select AUX
2. Press REC /
to start ripping, the system will scan the contents of USB / SD card and create folder to store
MP3 track.
3. Icon "REC" and message " RIPP TO " are displayed, icon " AUX " start flashing.
4. The target device icon " USB " or " CARD " start flashing as ripping begins.
5. Press STOP/BAND /
to exit AUX ripping
Note: The message " NO FUNCT " will be displayed if any key pressed during AUX ripping process. The message "
NO DEV " will be shown if neither USB or SD card not detected. The message " FULL " will be displayed if not enough
memory in target device.
Delete MP3 tracks
The system support deleting previous recorded MP3 or existing files.
1. In USB or SD card playback mode, press and hold REC/ERASE /
and will be deleted.
2. Message " delete " is displayed
OPTIONAL EXTERNAL SPEAKERS
1. With your new radio, you have the option of adding external speakers.
2. The speaker jacks for external speakers are located on the back of the radio.
Along with the speaker jacks is a switch labeled Int./Ext.
When using external speakers, this switch must be switched to the EXT. position. Doing this turns off the internal
speakers in the radio and redirects the power to the external speakers.
3. If you decide not to use the external speakers, be sure the switch is switch to INT.
LED LIGHTING
The 7-colour changing LED lights in the front tubes are controlled by the LIGHTING SWITCH (RELEASE/HOLD) on the
rear of the unit.
for 2 seconds, current playback track is stopped
11
ESPAÑOL
UBICACIÓN DE LOS CONTROLES
ANTENA
POWER / STAND BY
EXTERNA
CABLE DE
CORRIENTE
BATERÍA DE EMERGENCIA
CONECTOR DE
ENTRADA AUX
CONECTOR DE SALIDA 12V
OPEN/
EQ
MUTE
CLOSE
EQ
PRESET +
REC
SLEEP
REC
PRESET
VOL
PRESET -
FUNC
PLAY / PAUSA
IR ATRÁS-
RANDOM
ALEATORIO
ID3
PROG
ID3
REPEAT
MEM
BAND
CLOCK
STOP / BANDA
0
1
2
TIMER
MONO
3
4
5
STEREO
0-9
6
7
8
9
TOMA DE CORRIENTE
INTERRUPTOR DE
LUCES(MANTENER/
CAMBIAR)
INTERRUPTOR
CONECTOR DE
ALTAVOZ INT./EXT.
ALTAVOZ EXTERNO
56
ABRIR/CERRAR CD
MUTE
SLEEP
VOLUMEN +
FUNCIÓN
VOLUMEN -
IR ADELANTE/+
PROGRAMA
REPETIR
ALARMA
MONO/ESTÉREO
Publicidad
Tabla de contenido
