Brandson Equipment 303257 Manual Del Usuario página 13

Caution! The window vacuum cleaner is not supplied with the battery fully
charged. Therefore charge the battery fully before using the device.
1. Mount the detachable lip to the tank till it engages properly (fig. 1-4, previous
page).
2. Before charging the device, always ensure that the product is turned off during
charging.
3. Connect the power adapter to a properly installed socket and to the charging
port of the window vacuum cleaner. Ensure that you charge the device using the
original power adapter.
4. The status LED glows red during the charging process. Once the device is fully
charged, the LED changes from red to blue.
5. Use the provided power adapter only to charge the window vacuum cleaner.
6. Use the device only in combination with commonly available window cleaning
products (not foam cleaner etc.).
7. Only use genuine spare parts or accessories which are approved by the manu-
facturer.
8. Ensure that you empty the dirty water from the tank after cleaning.
9. Charge the device fully after using it. Store the device after charging it fully.
7. Usage
Select the surface to be cleaned and clean it using the cleaning agent as usual
with a conventional window wiper. Alternatively, you can use the provided
spray bottle with cleaning attachment to clean the window. To wipe the window
subsequently, take the window vacuum cleaner and turn it on using the "on/off"
button.
Now clean the window using the window vacuum cleaner. Ensure that you do
not exceed the maximum filling level. Pay attention to the level in the various
application areas.
13
English