Troubleshooting - KLARSTEN MasterFresh Manual Del Usario

TROUBLESHOOTING

Problem
Error code Er1
Error code Er2
Error code Er3
Error code Er4
Error code Er7
Error code Er8
No display on the screen
Die Lampe leuchtet nicht.
Exhaust fan does not work
No response from the button
No steam
Possible Cause
Upper sensor error
Short circuit of the upper
sensor
Error of the lower sensor
Short-circuit of the lower
sensor
Evaporator sensor error
Short circuit of the evaporator
sensor
Check whether the power
supply plug is plugged
Display panel in poor contact
Oven lamp is damaged
Poor contact
Fan is damaged
PCB is failed or damaged
Water pipe is blocked
Evaporator heater is damaged
Water intake system is
damaged
Suggested Solution
Switch off the appliance,
open the door and let it cool
down for 10 minutes. Restart
the appliance. If the problem
persists, contact a service
center for inspection and
repair.
Contact a specialist company
for inspection and repair.
Re-energize.
Contact a specialist company
for inspection and repair.
Replace the lamp.
Contact a specialist company
for inspection and repair.
Contact a specialist company
for inspection and repair.
Contact the after-sales
department for repair
Contact a specialist company
for inspection and repair.
EN
41