Publicidad
Idiomas disponibles
Idiomas disponibles
Tip Cleaning System
Select the option that best suits your tip cleaning needs.
Splashguard
Brass Wool
Ref. CL6210
Very effective cleaning method.
Leaves a small layer of solder on the tip preventing
oxidation between cleaning and rewetting.
More options for the splashguard (not supplied):
Inox Wool
Ref. CL6205
An alternative to
Brass Wool.
Tip Wipe
Sponge
Ref. S0354
The least harmful cleaning method.
Keep the sponge damp with distilled water to prevent
tip wear.
Tapping:
Tap gently to eliminate excess solder.
6
Metal Brush
Ref. CL6220
When used carefully,
it provides a more
thorough cleaning.
Wiping:
Use the slots to wipe off any remaining
particles.
Changing cartridge
Turn the station off and follow these guidelines for a safe cartridge change:
1. Removing
Loosen the screw to remove the cartridge.
Use a flat nosed pliers if the cartridge is hot.
3. Aligning
Alignment
Use a flat nosed pliers for a correct alignment.
Compatible cartridges
CP station works with C120 cartridge range. Check the model that best adapts to your soldering needs
in www.jbctools.com
C120-004
C120-005
1,5mm
ø0,7
5mm
w w w.jbctools.com
2. Inserting
Mark
Important: Insert the cartridge to the mark
for a proper connection.
4. Fixing
Important: Tighten the screw. This is
necessary for the tool to function.
Be careful not to over-tighten the screw.
C120-001
C120-009
C120-009
C120-010
C120-010
ø 0,2
7
Publicidad
