Camera Setup; Monitor Setup; Power Supply - Luvion ESSENTIAL PLUS Manual De Instrucciones

Setup
1

Camera Setup

1
. 1
P ower Supply - Using AC Power
1. Plug one end of the provided power adapter into a wall outlet and the other
end into the back of the camera. See Fig. 3.
2. Press the POWER button
LED on the camera will light up (green light). See Fig. 3.
Note : Press the POWER button less than 1 second to turn off
the camera.
1
. 2
Fine Tuning
Place the camera in a convenient location, point the lens toward the observation
area.
1
. 3
Night Vision
The camera has eight high-intensity LEDs for picking up clear images in the
dark. When the light sensor detects low ambient light levels, the LEDs will be
automatically activated.
1
. 4 Room Temperature Measurement
Temperature sensor can measure room temperature on camera side and the room
temperature indicator will be displayed on the screen of the monitor unit.
2

Monitor Setup

2
. 1

Power Supply

The monitor uses a
Using built
1. Press the POWER/VOX button
the monitor on. See Fig. 4.
Note 1: Charge by using the power adapter
Note 2: When sufficiently charged , the "Power" LED will light up (green light);
When the battery is low, the red LED light will start blinking.
Note 3: Press the POWER/VOX button and hold it around 3 seconds to turn off
the monitor.
LUVION
Premium Baby products
less than 1 second to turn on the camera. The
built-in rechargeable battery
-
in Battery
or the household AC power current.
and hold it around 3 seconds to turn
.
19 19
EN