Lowering / Raising Saw Blade; Lowering Example - TYROLIT Hydrostress FSE1240 Serie Instrucciones De Servicio

TYROLIT Hydrostress AG

6.5 Lowering / raising saw blade

6.5.1

Lowering example

1. Press the Lower button (3) until the saw blade touches the material to be cut.
2. Set the cutting depth indicator (1) in the 0 position.
3. Using the Lower key, lower the saw blade to the desired cutting depth.
4. Tighten up the bit stop locking (2).
Floor Saw FSE1240 Page 15