Midland BT Rider Manual De Instrucciones página 16

LIGHT AND SOUND SIGNALS – Headset
LED indication
None
Triple blue flash
Triple red flash
Single blue flash every 3 seconds
Double blue flash every 3 seconds
Rapid red-blue alternating flash
Single red flash every 3 seconds
Double red flash every 3 seconds
Steady red
Steady red turns off
Audio signals
Ascending tone (low-high)
Descending tone (high-low)
 tone
HEADSET FUNCTIONS
MOBILE PHONE
If you want to...
Turn on the unit
Turn off the unit
Answer a call
Reject a call
Terminate a call
Increase the volume
Decrease the volume
Voice Dial
Redial
Status
Headset switched off
Headset being turned on
Headset being turned off
Standby (not on a call)
Active (on a call or initiating a connection)
Pairing mode
Low battery while in stand-by
Low battery while a call in progress
Charging
Battery is fully charged
Status
Headset or Voice Recognition being turned on
Headset or Voice Recognition being turned off
acknowledge tone for call rejected or other key entries
... do this
Press the Control button for 6 seconds at least
Press the Control button for 3 seconds at least
Short press of the Control button / say a word
Short press the side function button / remain silent for 7 seconds
Short press the side function button
Short press of the Volume Up control
Short press of the Volume Down control
In stand by mode, press quickly the Control button and state the name
of the person to call.
In stand by mode, short press the side function button
7