Problem
Camera will not
take photos
Photos are blurry
Cannot transfer
photos to the
computer
Product functions
erratically or does
not function at all
Troubleshooting
Cause
Batteries are weak
or exhausted
Camera is turned off
Camera memory is full of
images (
appears on
the LCD screen)
Lens may be dirty
or smudged
Camera moved when
picture was taken
You are too close to
your subject
USB cord may not be
properly connected
Static electricity may tem-
porarily stop the electronic
function of the camera and
cause picture loss. For
example, walking across the
rug and touching the camera
may create static electricity.
Batteries are weak
or exhausted
Camera is too cold (left
out or used in freezing
temperatures)
Solution
Replace the batteries in the camera with
four, new "AAA" (LR03) alkaline batteries.
Press the power button on the back of
the camera to turn it on.
Download pictures to your computer
or use the image delete button on the
camera to remove some of them.
Clean the lens with a soft cloth.
Try to keep the camera steady when you
take pictures.
The focus range is from about
1,2 m (4') – infi nity
Check cord connections on both your
camera and your computer.
Reset the electronics by opening and
closing the battery compartment door.
Replace the worn batteries with four,
new "AAA" (LR03) alkaline batteries.
Normal function will return once camera
warms up.
31