Using Your Vacuum In Upright Mode; Using Your Vacuum In Above-Floor Mode - Shark Slim Upright NV200 Serie Manual De Instrucciones

USING YOUR VACUUM IN
UPRIGHT MODE
NOTE: The brushroll will spin
only when the vacuum cleaner
handle is tilted back.
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT ON THE NOZZLE
MEAN?
Solid Green
The brushroll is on and
working as it should.
Solid Red
There is a jam in the brushroll
area. Turn your vacuum off
and remove the blockage.
1
Plug the power cord into an outlet. Place foot on floor nozzle
and tilt handle back.
2 Press POWER to turn on the vacuum.
3 To Clean Bare Floors or Area Rugs:
In HARD FLOOR mode, the brushroll and the Soft Roller
spin together slowly. The Soft Roller traps fine dust and
large particles, while the brushroll directs the debris into the
suction channel.
To Clean High Pile Carpets:
In CARPET mode, both brushrolls spin faster, working
together to pick up debris below the surface of your carpets.
4 The CARPET/HARD FLOOR button lets you control
brushroll speed by toggling from one mode to the other.
To increase brushroll speed to clean carpets, press the
CARPET/HARD FLOOR button so the green light is
illuminated. To clean bare floors with slower brushroll speed,
press the button again and the light will turn off.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets)
please select CARPET mode.
9
1-800-798-7398
USING YOUR VACUUM IN
ABOVE-FLOOR MODE
STEP 1
ABOVE-FLOOR MODE
1 Stand the vacuum upright.
2 Attach desired cleaning
To attach an accessory
accessory.
directly to the handle,
press the Handle release
button and lift the handle
out of the wand. For more
reach, attach an accessory
to the end of the wand:
press the Extension Wand
release button and lift the
wand out of the nozzle.
STEP 2 STEP 3
LIFT-AWAY MODE
™
3 To use in Lift-Away mode,
press the Floor Nozzle
Release button at the
bottom of the vacuum
body to disconnect from
the floor nozzle. Attach
desired cleaning accessory
to the handle or wand.
s h a r kc l e a n . c o m
10